Search Results

Standard

Candidate Improvements to Dedicated Short Range Communications (DSRC) Message Set Dictionary [SAE J2735] Using Systems Engineering Methods

2014-08-26

HISTORICAL

J3067_201408

This document is not a standard, it is a candidate for a standard being submitted to SAE for their consideration as a comment to SAE J2735. The term SAE J2735 SE candidate is used within this document to refer to this submission. This document specifies dialogs, messages, and the data frames and data elements that make up the messages specifically for use by applications intended to utilize the 5.9 GHz Dedicated Short Range Communications for Wireless Access in Vehicular Environments (DSRC/WAVE, referenced in this document simply as “DSRC"), communications systems. Although the scope of this Standard is focused on DSRC, these dialogs, messages, data frames and data elements have been designed, to the extent possible, to be of use for applications that may be deployed in conjunction with other wireless communications technologies.

Standard

Candidate Improvements to Dedicated Short Range Communications (DSRC) Message Set Dictionary [SAE J2735] Using Systems Engineering Methods

2020-10-06

CURRENT

J3067_202010

This document is not a standard, it is a candidate for a standard being submitted to SAE for their consideration as a comment to SAE J2735. The term SAE J2735 SE candidate is used within this document to refer to this submission. This document specifies dialogs, messages, and the data frames and data elements that make up the messages specifically for use by applications intended to utilize the 5.9 GHz Dedicated Short Range Communications for Wireless Access in Vehicular Environments (DSRC/WAVE, referenced in this document simply as “DSRC"), communications systems. Although the scope of this Standard is focused on DSRC, these dialogs, messages, data frames and data elements have been designed, to the extent possible, to be of use for applications that may be deployed in conjunction with other wireless communications technologies.

Standard

Cast Shot and Grit Size Specifications for Cleaning and Peening

2023-06-27

CURRENT

J444_202306

This SAE Recommended Practice pertains to blast cleaning and shot peening and provides for standard cast shot and grit size numbers. For shot, this number corresponds with the opening of the nominal test sieve, in ten thousandths of inches1, preceded by an S. For grit, this number corresponds with the sieve designation of the nominal test sieve with the prefix G added. These sieves are in accordance with ASTM E11. The accompanying shot and grit classifications and size designations were formulated by representatives of shot and grit suppliers, equipment manufacturers, and automotive users.

Standard

Cast Shot and Grit Size Specifications for Peening and Cleaning

2017-10-10

HISTORICAL

J444_201710

This SAE Recommended Practice pertains to blast cleaning and shot peening and provides for standard cast shot and grit size numbers. For shot, this number corresponds with the opening of the nominal test sieve, in ten thousandths of inches1, preceded by an S. For grit, this number corresponds with the sieve designation of the nominal test sieve with the prefix G added. These sieves are in accordance with ASTM E 11. The accompanying shot and grit classifications and size designations were formulated by representatives of shot and grit suppliers, equipment manufacturers, and automotive users.

Standard

Circuit Breakers

2022-05-26

CURRENT

J553_202205

This SAE Standard defines the test conditions, procedures, and performance requirements for circuit breakers in ratings up to and including 200 A. The document includes automatic reset, modified reset, and manually reset types of circuit breakers for 12 VDC, 24 VDC, and 48 VDC electrical systems. Some circuit breakers may have dual voltage ratings (AC and DC); however, this document evaluates DC performance only.

Standard

Combination Tail and Floodlamp for Agricultural Equipment

1986-01-30

CURRENT

J976_198601

Standard

Combination Tail and Floodlamp for Industrial Equipment

2003-05-15

CURRENT

J94_200305

This SAE Standard provides performance and general design requirements and related test procedures for a combination tail and floodlamp for use on industrial wheeled equipment that may be operated on public roads.

Standard

Component Nomenclature - Skidder - Grapple

2018-09-02

HISTORICAL

J1111_201809

This SAE Standard characterizes grapple skidders and identifies the major components and parts most commonly associated therewith. Illustrations used herein are not intended to include all existing commercial machines or to be exactly descriptive of any particular machine. They have been included to facilitate application of this document

Standard

Component Nomenclature - Skidder - Grapple

2013-09-25

HISTORICAL

J1111_201309

This SAE Standard characterizes grapple skidders and identifies the major components and parts most commonly associated therewith. Illustrations used herein are not intended to include all existing commercial machines or to be exactly descriptive of any particular machine. They have been included to facilitate application of this document

Standard

Component Nomenclature—Feller Buncher

2007-08-22

HISTORICAL

J1254_200708

This SAE Standard includes names of major components and parts peculiar to this type of machine. Illustrations used here are not intended to include all existing commercial machines or be exactly descriptive of any particular machine. They have been provided to describe the principles to be used in applying this document.

Standard

Connection and Accessory Locations for Towing Multiple Trailers

2003-08-29

HISTORICAL

J849_200308

This SAE Recommended Practice establishes the recommended locations for the air brake and electrical connections for towing multiple trailers. It applies to all commercial trailers except drop frame and car haul types.

Standard

Cutting Edge - Cross Sections Loader Straight

2011-10-25

CURRENT

J1303_201110

For cutting edges used on buckets for loaders defined in SAE J1057a. The dimensions are applicable to rolled, cast, forged, flame cut, and machined cutting edge sections. Straight cutting edges are defined as those whose leading edge and rear edge are parallel and, thus, are of constant cross section. For "straight cutting edge sections with bolt holes," see SAE J1304 FEB85. NOTE—For some heavy duty applications, cross sections with larger blunts and greater bevel angles may be required.

Standard

Cutting Edge - Double Bevel Cross Sections

2014-01-08

HISTORICAL

J738_201401

This standard is for cutting edge sections typically used in earth-moving machinery defined in SAE J1116 and ISO 6165: a Scrapers as defined in ISO 7133. b Dozers as described in ISO 6747. c Loaders as described in ISO 7131. d Graders as described in ISO 7134. Hole spacing is defined ISO 7129. Hole conformation is defined in SAE J740.

Standard

Cutting Edge - Optional Cross-Sections and Dimensions Loader Straight

2011-10-25

CURRENT

J1581_201110

The purpose of this SAE Recommended Practice is to specify dimensions for loader straight cutting edge cross sections without holes and with bolt holes for mounting bolt-on teeth and tooth adaptors on loader buckets described by SAE J731. This recommended practice is intended to supplement SAE J1303 and SAE J1304 with cross sections for heavier duty applications, by identifying larger blunts, greater bevel angles, larger bolt holes, and greater bolt spacing.

Standard

Cutting Edge—Curved Grader

2006-02-05

HISTORICAL

J739_200602

This SAE Standard is intended for curved cutting edge sections used on graders as defined in SAE J870 and J1057. (See Figure 1 and Table 1.) Hole conformation is further defined in SAE J740 and J1580.

Standard

Cutting Edge—Double Bevel Cross Sections

2008-07-07

HISTORICAL

J738_200807

This standard is for cutting edge sections typically used in earthmoving machinery defined in SAE J1507: a Tractor - Scrapers as defined in SAE J728. b Dozers as described in SAE J729 and J173. c Loaders as described in SAE J731. d Graders as described in SAE J870. Hole spacing is defined for dozers and scrapers in J737 and graders in J739. Hole conformation is defined in J740.

Standard

Cylinder Rod Wiper Seal Ingression Test

1993-08-01

CURRENT

J1195_199308

To provide a method for determining the capability of a wiper seal used on hydraulic cylinders, to withstand cyclic movement of the sealing surface in a contaminated environment and restrict the passage of particulate contaminant under conditions of zero side load. To verify whether or not a wiper seal will exhibit a given service life in a contaminated environment and maintain its capability of restricting the passage of particulate contamination.

Standard

DEVELOPMENT OF A FREQUENCY WEIGHTED PORTABLE RIDE METER

1978-06-01

HISTORICAL

J1225_197806

The task force was assigned responsibility for the following activities: 1 Formulate a recommendation for an acceptable ride meter including features, functional performance, and design specifications. 2 Conduct a survey to determine if there is a commercially available ride meter conforming to the recommendation. 3 If an acceptable ride meter is not commercially available, work with an electronics supplier to initiate a design and build a working prototype of a meter conforming to the recommendation.

Standard

DOZER CAPACITY

1980-02-01

HISTORICAL

J1265_198002

This recommended practice applies only to straight, angling, semi-U, and U-blade dozers for crawler and wheel tractors. It applies to angling blade dozers only in the straight (not angled) position.

Standard

DOZER CAPACITY

1986-05-01

HISTORICAL

J1265_198605

This recommended practice applies only to straight, angling, semi-U, and U-blade dozers for crawler and wheel tractors. It applies to angling blade dozers only in the straight (not angled) position.